Sony KDL-32L4010 Flat Panel Television User Manual


 
34
Using the Channel Menu
Favorites Lets you set up a list of up to eight of your favorite channels or inputs.
Press V/v to select Add to Favorites option and press
to add the current channel
or input to your Favorites list.
To select a favorite channel or input from the list, press V/v to go through the list and
to select.
~
To exit press .
To quickly access the Favorites list, press when there is no menu on the
screen and select a channel.
Cable On
Select if you are receiving cable channels via a cable TV provider.
Off Select if you are using an antenna.
Add
Digital
Channels
Select to add digital channels without replacing the original channel list. Be sure to set
Cable setting to On or Off in Channel menu for the correct type of input signal you
choose.
Auto Program Automatically sets up the channel list on the TV for all receivable channels (digital and
analog).
~
Before starting Auto Program, be sure to select On or Off for the Cable option
under the Channel menu. When it is On, the TV will search for cable channels;
when it is Off, the TV will search for over-the-air signals with an antenna
connection.
If you are using an A-B RF switch (not supplied) to switch between cable or antenna
connection, be sure to select the correct Cable option to On or Off in the Channel
menu.
1 Select Auto Program.
2 Select OK to start Auto Program. When Auto Program is done, select OK.
~
IMPORTANT: You must perform Auto Program after cable or antenna is
connected.
If you cancel Auto Program before completion, some channels may not be
available.
Show/Hide
Channels
Allows you to show or hide channels that appear when you use the CH +/– button.
1 Press V/v to scroll through the channels until you find the channel you want to show
or hide.
2 Press to determine if the channel will be shown or hidden.
~
To show or hide more channels, repeat steps 1-2.
MENU