Filter
Top Products
8
Recommended Measures to Secure the
TV
Secure the stand for the TV
Make sure the TV stand can adequately
support the weight of the TV. Use two angle
braces (not supplied) to secure the stand.
For each angle brace use the appropriate
hardware to:
• Attach one side of the angle brace to the
wall stud.
• Attach the other side to the TV stand.
Secure the TV to the stand
Use the optional hardware listed below (not
supplied):
•M6 × 10-12 mm anchor bolt (screwed into
the TV’s Table-Top stand).
• A screw or similar (attach it to the TV
stand).
• Rope or chain (strong enough to support
the weight of the TV). Make sure that
there is no excess slack in the rope or
chain.
An alternative way to secure the TV is with an
optional Sony Support Belt Kit.
~
• Contact Sony Customer Support to obtain the
optional Support Belt Kit by providing your TV
model name.
For United States call: 1-800-488-7669 or
visit: www.sony.com/accessories
For Canada call: 1-877-899-7669
Attach the TV to the wall
Use the hardware listed below (not supplied):
•Two M6 × 12-18 mm anchor bolts (screw
into the top-most wall-mount holes located
on the rear of the TV).
• Rope or chain (attach to one M6 anchor
bolt).
• Wall-anchor (attach to the wall stud)
strong enough to support the weight of the
TV (pass the rope through the wall-anchor,
then attach to the other M6 anchor bolt).
~
• Attaching the TV to the stand without properly
securing the TV or the stand to the wall will not
ensure that the TV will stay in place. For further
protection, follow all three measures
recommended above.
Stand
Angle brace
Anchor
bolt
Screw
Screw hole on the
Table-Top stand
Rope or
chain
Anchor bolts
Wall-mount
holes
Wall-anchor