Filter
Top Products
Location and Function of Parts and Controls
14
Location and Function of Parts and Controls
Front Panel
a Tally lamp
You can check the status of the monitor by the color of
the tally lamp.
The tally lamp lights in red, green or amber according to
the input signals.
b APERTURE control
Adjusts the picture sharpness.
Turn the control clockwise to increase the sharpness or
counterclockwise to decrease it.
c BRIGHT (brightness) control
Adjusts the picture brightness.
Turn the control clockwise to increase the brightness or
counterclockwise to decrease it.
d CHROMA control
Adjusts the color intensity.
Turn the control clockwise to increase the color intensity
or counterclockwise to decrease it.
e PHASE control
Adjusts color tones.
Turn the control clockwise to make the skin tones
greenish or counterclockwise to make them purplish.
f CONTRAST control
Adjusts the picture contrast.
Turn the control clockwise to make the contrast higher
or counterclockwise to make it lower.
g VOLUME control
Turn the control clockwise to increase the volume or
counterclockwise to decrease it.
h Menu operation buttons
Displays or sets the on-screen menu.
M/m/</, (arrow) buttons
Select the menu or make various adjustments.
MENU button
Press to display the on-screen menu.
Press again to clear the menu.
RESET button
Resets the value of an item back to the previous
value. This button functions when the menu item is
adjusted (displayed) on the screen.
APERTURE
LINE A LINE B
RGB/
COMPONENT
SCAN ASPECT MARKER MONO
ENTER
KEY INHIBIT
RESET MENU
POWER
BLUE
ONLY
EXT
SYNC
BRIGHT CHROMA PHASE CONTRAST VOLUME
APERTURE
LINE A LINE B
RGB/
COMPONENT
SDI-1 SDI-2 SCAN ASPECT MARKER MONO
ENTER
KEY INHIBIT
RESET MENU
POWER
BLUE
ONLY
EXT
SYNC
BRIGHT CHROMA PHASE CONTRAST VOLUME
1
2
qs
0
qa
qd qf qj qk ql w; wa ws wd
34567 8 9
2
qs qd qf qg qh qj qk ql w; wa ws wd
34567 8 9
LMD-9050/9030
LMD-9020