Filter
Top Products
Adjustment Using the Menus
25
REMOTE PARALLEL
1 PIN
2 PIN
3 PIN
4 PIN
6 PIN
7 PIN
8 PIN
KEY INHIBIT
KEY INHIBIT
Adjusting and Changing the
Settings
STATUS menu
The STATUS menu is used to display the current status
of the unit. The following items are displayed:
• Signal format
• Color temperature
• Gamma
• Component level
•NTSC setup
• RGB/COMP SEL
• Scan mode
• Power saving
• Model name
•Serial No.
COLOR TEMP/BAL menu
The COLOR TEMP/BAL menu is used for adjusting the
picture white balance.
You need to use the measurement instrument to adjust
the white balance.
Recommended: Konicaminolta color analyzer CA-210
USER CONTROL menu
The USER CONTROL menu is used for adjusting the
picture.
Items that cannot be adjusted depending on the input
signal are displayed in blue.
FORMAT xxxxx
xxxxxxxx
COLOR TEMP xxxx
GAMMA x
COMP LEVEL xxxxx
NTSC SETUP xx
RGB/COMP SEL xxxx
SCAN MODE xxxx
STATUS (1/2) Rr
POWER SAVING xx
MODEL LMD-90xx
SERIAL NO. xxxxxxx
STATUS (2/2) Rr
Submenu Setting
COLOR TEMP Select the color temperature from
among HIGH, LOW and USER
setting.
MANUAL ADJ If you set the COLOR TEMP to
USER setting, the item displayed is
changed from blue to white, which
means you can adjust the color
temperature.
• ADJUST GAIN...: Adjusts the
color balance (GAIN).
• ADJUST BIAS...: Adjusts the
color balance (BIAS).
• COPY FROM: If you select
HIGH or LOW, the white
balance data for the selected
color temperature will be
copied in the user setting.
xCOLOR TEMP xxxx
MANUAL ADJ
· ADJUST GAIN···
· ADJUST BIAS···
· COPY FROM xxx
COLOR TEMP/BAL
SUB CONTROL
xCONTRAST x
· BRIGHT x
· CHROMA x
· PHASE x
USER CONTROL (1/2) Rr
PICTURE CONTROL
xV SHARPNESS x
USER CONTROL (2/2) Rr