Filter
Top Products
Specifications
33
Video signal formats
The unit is applicable to the following signal formats.
*1The signal format is displayed as 1080/48I on the
screen.
*2The signal format is displayed as 1080/60I on the
screen.
A slightly squashed picture is displayed at a little
lower position, because the picture is displayed in
1035/1080 picture ratio on a 16:9 screen.
*3 The frame rate is also compatible with 1/1.001.
*4 HD-SDI signal is available for LMD-9050 only.
D1-SDI signal is available for LMD-9050/9030.
Input
System
Total
lines
Active
lines
Frame
rate
*3
Scanning format Aspect ratio
Signal standard
Analog SDI (HD/D1-SDI)
*4
575/50I (PAL) 625 575 25 2:1 interlace 16:9/4:3 EBU N10
(PAL: ITU-R BT.624)
PAL: ITU-R
BT.656
480/60I (NTSC) 525 483 30 2:1 interlace 16:9/4:3 SMPTE 253M
(NTSC: SMPTE 170M)
SMPTE-259M
576/50P 625 576 50 Progressive 16:9/4:3 ITU-R BT.1358 –
480/60P 525 483 60 Progressive 16:9/4:3 SMPTE 293M –
1080/24PsF
*1
1125 1080 24 2:1 interlace 16:9 SMPTE RP211 SMPTE-292M
1080/50I 1125 1080 25 2:1 interlace 16:9 SMPTE 274M SMPTE-292M
1035/60I
*2
1125 1035 30 2:1 interlace 16:9 SMPTE 260M/BTA
S-001B
SMPTE-292M
1080/60I 1125 1080 30 2:1 interlace 16:9
SMPTE 274M/BTA
S-001B
SMPTE-292M
720/60P 750 720 60 Progressive 16:9 SMPTE 296M SMPTE-292M
720/50P 750 720 50 Progressive 16:9 SMPTE 296M SMPTE-296M