Filter
Top Products
Specifications
31
EXT SYNC input
BNC type (1), 0.3 to 4 Vp-p
± bipolarity ternary or negative
polarity binary
SDI (HD/D1-SDI) input (for LMD-9050)
SDI (D1-SDI) input (for LMD-9030)
SDI is not available for LMD-9020.
SDI IN-1/SDI IN-2
Sampling frequency
D1-SDI: Y/R-Y/B-Y 13.5 MHz
HD-SDI: Y/P
B/PR 74.25 MHz
Quantization
10 bits/sample
PARALLEL REMOTE input terminal
Parallel remote
Modular connector 8-pin (1)
Output
LINE A output connectors
Y/C output 4-pin mini-DIN (1), Loop-through,
with 75 ohms automatic terminal
function
VIDEO output
BNC type (1), Loop-through, with 75
ohms automatic terminal function
LINE B output connectors
VIDEO output
BNC type (1), Loop-through, with 75
ohms automatic terminal function
SDI (HD/D1-SDI) MONITOR output (for LMD-9050)
SDI (D1-SDI) MONITOR output (for LMD-9030)
SDI is not available for LMD-9020.
BNC type (1),
Output signal amplitude:
800 mVp-p
±10% Output
impedance:
75-ohms unbalanced
AUDIO output
Mini jack (1), Loop-through
HEADPHONES output
Mini jack (1), Loop-through
Built-in speaker output
0.5 W (mono)
General
Power AC100 to 240 V, 50/60 Hz,
0.82 A to 0.42 A
LMD-9050: DC 12 V, 2.2 A
LMD-9030: DC 12 V, 1.6 A
LMD-9020: DC 12 V, 1.5 A
Power consumption
LMD-9050: 28 W (When AC adaptor
is attached)
LMD-9030: 22 W (When AC adaptor
is attached)
LMD-9020: 20 W (When AC adaptor
is attached)
Peak inrush current
(1) Power ON, current probe method:
75 A (240 V)
(2) Hot switching inrush current,
measured in accordance with
European standard EN55103-1:
20 A (230 V)
Dimensions Approx. 216 × 230 × 159.5 mm (not
including the projection parts)
(8
5
/8 × 9
1
/8 × 6
3
/8 inches)
When AC adaptor is installed
216 × 230 × 210 mm
(8
5
/8 × 9
1
/8 × 8
3
/8 inches) (w/h/d)
Mass LMD-9050: Approx. 3.2 kg (7 lb 1 oz)
When AC adaptor is installed
Approx. 3.9 kg (8 lb 10 oz)
LMD-9030: Approx. 3.1 kg (6 lb
13 oz)
When AC adaptor is installed
Approx. 3.8 kg (8 lb 6 oz)
LMD-9020: Approx. 3.0 kg (6 lb
10 oz)
When AC adaptor is installed
Approx. 3.7 kg (8 lb 3 oz)
Operating conditions
Temperature0 °C to 40 °C (32 °F to 104 °F)
Recommended temperature
20 °C to 30 °C (68 °F to 86 °F)
Humidity 30% to 85% (no condensation)
Pressure 700 hPa to 1060 hPa
Storage and transport conditions
Temperature–20 °C to 60 °C (–4 °F to 140 °F)
Humidity 0% to 90%
Pressure 700 hPa to 1060 hPa
Accessories supplied
AC power cord (1)
AC power adaptor (1)
AC plug holder (1)
Operating Instructions (1)
CD-ROM (1)
Warranty Card (1)
Using the CD-ROM Manual (1)
Optional accessories
Mounting bracket
MB-525
Mounting panel
MB-528
Monitor ENG kit
VF-509
Rechargeable battery pack
BP-L90A, BP-L60S, BP-L40A,
BP-GL95, BP-GL65
* The sale of the optional accessories
may end without notice.
Design and specifications are subject to change without
notice.