Filter
Top Products
Adjustment Using the Menus
27
MARKER When the frame of the film is
displayed on the screen, select the
aspect ratio according to the film.
• When 16:9 aspect ratio is
selected with the ASPECT
button
You can select from among
4:3, 15:9, 14:9, 13:9, 1.85:1,
2.35:1, 1.85:1 & 4:3 and
OFF.
• When 4:3 aspect ratio is
selected with the ASPECT
button
You can select from among
16:9 and OFF.
CENTER MARKER Select ON to display the center
mark of the picture and OFF not to
display.
MARKER LEVEL Sets the luminance to display the
MARKER.
When the setting is low, the marker
is displayed dark.
Note
The luminance of the center marker
does not change.
MARKER MAT Selects whether you put mat on the
outside of the marker display.
• OFF: No mat is put.
• HALF: Gray mat is put.
• BLACK: Black mat is put.
MARKER LINE Adjust the size of the marker line.
Select from among FINE,
STANDARD and BOLD.
Note
The size of the marker line does not
change.
SCAN Enable to select the scan mode by
the SCAN select button.
• OFF: Enable to select NORMAL
and UNDER SCAN.
• ZERO: Enable to select
NORMAL, UNDER SCAN
and ZERO SCAN.
• ZOOM: Enable to select
NORMAL, UNDER SCAN
and ZOOM.
• ZERO & ZOOM: Enable to
Select NORMAL, UNDER
SCAN, ZERO SCAN and
ZOOM.
Note
When the aspect ratio is set to 16:9,
ZOOM functions.
Submenu Setting