Filter
Top Products
Location and Function of Parts and Controls
18
EXT SYNC IN (external sync) connectors
(BNC)
When this unit operates on an external sync signal,
connect the reference signal from a sync generator
to this connector.
Press the EXT SYNC button to use the sync signal
through this connector.
Note
When inputting a video signal with the jitters, etc.
the picture may be disturbed. We recommend using
the TBC (time base corrector).
AUDIO IN (mini jack)
When using an analog RGB or a component signal
as a video signal, use this jack for the input of an
audio signal. Connect it to the audio output jack on
equipment such as a VCR.
e SDI (HD/D1-SDI) input/output connectors (for
LMD-9050 only)
SDI (D1-SDI) input/output connectors (for
LMD-9030)
There are input connectors (two) for serial digital
component signal and output connector for serial digital
component monitor signal.
Select by the SDI-1 or SDI-2 button on the front panel.
*
1
The SDI (HD/D1-SDI) connectors are printed as SDI (D1-
SDI) for LMD-9030.
IN-1 (BNC)
Input the serial digital component signals.
IN-2 (BNC)
Input the serial digital component signals.
MONITOR OUT (BNC)
Output the signals selected by the SDI-1 or SDI-2
button on the front panel.
Note
The signal from the MONITOR OUT connector
does not safisfy the ON-LINE signal specifications.
f PARALLEL REMOTE terminal (modular
connector)
Forms a parallel switch and controls the monitor
externally.
For safety, do not connect the connector for peripheral
device wiring that might have excessive voltage to this
modular connector.
For details on the pin assignment and factory setting
function assigned to each pin, see page 32.
g Service terminal
This connector is for use by service personnel only.
h HEADPHONES jack
The monaural sound is output. When the stereo
headphones are inserted, the monaural sound is heard
from both left and right channels.
i EJECT button
While sliding this button, remove the AC adaptor or
battery pack.
j AC adaptor attachment place
Attach the supplied AC adaptor or battery pack.
k DC 12V IN jack (XLR-type, 4-pin)
Connects the DC 12V external power source to use the
monitor.