Filter
Top Products
101
Settings and Adjustments
Parental Control
(Password)
This “Password” Setup allow you to set or to
modify the password that gives access to Parental
Control settings.
1 Press SYSTEM MENU while the recorder is
in stop mode.
2 Select “SETUP,” and press ENTER.
3 Select “Password,” and press ENTER.
The Password Setup Display appears
• If you have not yet set a password, the
display for registering a new password
appears.
• When you have already registered a
password, the display for entering the
password appears.
If you wish to change your password, first
enter your current password using the number
buttons, then select “OK” and press ENTER.
The display for registering a new password
appears.
4 Enter your new four-digit password using
the number buttons, then select “OK” and
press ENTER.
b
Note
If you forget your password, you will have to reset it by
selecting “Parental Control” of “Factory Setup” in
“Options” setup (page 102).
Disc and Remote Control
Settings/Factory Settings
(Options)
The “Options” setup allows you to set up other
operational settings.
1 Press SYSTEM MENU while the recorder is
in stop mode.
2 Select “SETUP,” and press ENTER.
3 Select “Options,” and press ENTER.
The “Options” setup appears with the
following options. The default settings are
underlined.
Format DVD-RW (DVD-RW only)
The recorder automatically starts formatting in
VR mode or Video mode, whichever is selected
below, when a new, unformatted DVD-RW is
inserted.
Dimmer
Adjusts the lighting of the front panel display.
b Note
When “Power Save” in “Options” setup is set to “On,”
the front panel display is turned off during standby
regardless of this setting.
Password
Enter a new password.
OK
Cancel
Password
OK
Cancel
Enter your password.
VR Automatically formats the disc in
VR mode.
Video Automatically formats the disc in
Video mode.
Normal
Bright lighting.
Power
Save
Low lighting. Turns off the
lighting when the power is off.
SETUP
Format DVD-RW : VR
Settings
DTV Settings
Video
Audio
Features
Password
Options
Easy Setup
Command Mode :
Factory Setup
Auto Display :
Power Save :
Dimmer :
DVD3
On
Off
Normal
,continued