Filter
Top Products
111
Additional Information
Specifications
System
Laser: Semiconductor laser
Transmission standards: DVB-T
Channel coverage: UHF channels B21 - B69
The above channel coverage merely ensures the
channel reception within these ranges. It does not
guarantee the ability to receive signals in all
circumstances.
Aerial out: 75-ohm asymmetrical aerial socket
Video recording format: MPEG Video
Audio recording format/applicable bit
rate: Dolby Digital 2 ch/256 kbps
Inputs and outputs
LINE 2 OUT
(AUDIO): Phono jack/2 Vrms/10 kilohms
(VIDEO): Phono jack/1.0 Vp-p
(S VIDEO): 4-pin mini DIN/Y:1.0 Vp-p,
C: 0.3 Vp-p (PAL)
LINE 2 IN/LINE 4 IN
(AUDIO): Phono jack/2 Vrms/more than
22 kilohms
(VIDEO): Phono jack/1.0 Vp-p
(S VIDEO): 4-pin mini DIN/Y:1.0 Vp-p,
C: 0.3 Vp-p (PAL)
LINE 1 – TV: 21-pin
CVBS IN/OUT
S-Video/RGB OUT (upstream)
LINE 3: 21-pin
CVBS IN/OUT
S-Video/RGB IN
S-Video OUT (downstream)
DV IN: 4-pin/i.LINK S100
DIGITAL OUT (OPTICAL): Optical output jack/
–18 dBm (wave length: 660 nm)
DIGITAL OUT (COAXIAL): Phono jack/
0.5 Vp-p/75 ohms
COMPONENT VIDEO OUT
(Y, P
B/CB, PR/CR):
Phono jack/Y: 1.0 Vp-p, P
B/CB: 0.7 Vp-p,
P
R/CR: 0.7 Vp-p
HDMI OUT (RDR-HXD910 only):
Type A (19-pin)
General
Power requirements: 220-240 V AC, 50/
60 Hz
Power consumption:
RDR-HXD710: 57 W
RDR-HXD910: 60 W
Dimensions (approx.): 430 × 75 × 328 mm
(width/height/depth) incl. projecting parts
Hard disk drive capacity:
RDR-HXD710: 160 GB
RDR-HXD910: 250 GB
Mass (approx.):
RDR-HXD710: 5.2 Kg
RDR-HXD910: 5.3 Kg
Operating temperature: 5ºC to 35ºC
Operating humidity: 25% to 80%
Supplied accessories:
Audio/video cord (1)
Mains lead (1)
Aerial cable (1)
Remote commander (remote) (1)
R6 (size AA) batteries (2)
Specifications and design are subject to change
without notice.
Compatible colour systems
This recorder is designed to record using the PAL
colour system and play back using the PAL or
NTSC colour systems.