Filter
Top Products
107
Additional Information
The angles cannot be changed.
, Multi-angles are not recorded on the DVD
VIDEO being played.
, You are trying to change the angles when “ ”
does not appear on the TV screen (page 62).
, The DVD VIDEO prohibits changing angles.
, Try changing the angle using the DVD VIDEO’s
menu.
, The angles cannot be changed for the titles
recorded on this recorder.
The MP3 audio tracks do not play.
, The MP3 audio tracks are not recorded in a
format that the recorder can play (page 70).
The JPEG image files do not play.
, The JPEG image files are not recorded in a
format that the recorder can play (page 70).
, Progressive JPEG images cannot be played.
TV Pause does not work.
, You are recording to the HDD or the HDD is full.
The programme position cannot be changed
from the programme position you are
recording.
, Set the TV’s input source to “TV.”
Recording does not start immediately after you
press z REC.
, Operate the recorder only after “LOAD,”
“FORMAT,” or “INFOWRITE” disappears
from the front panel display.
Nothing was recorded even though you set the
timer setting correctly.
, There was a power failure during recording.
, The recorder’s internal clock stopped due to a
power failure that lasted for more than 1 hour.
Reset the clock (page 89).
, The channel was hidden after the timer recording
was set. See “Programme Hide” on page 92.
, Disconnect the mains lead from the mains, and
connect it again.
, The programme contains copy protection signals
that restrict copying.
, Other timer setting overlapped the timer setting
(page 57).
, There is no DVD inside the recorder.
, There is not enough disc space for the recording.
, The recorder was in the process of DV Dubbing.
, A scrambled channel is selected.
, The Channel activated Parental Lock is selected.
Recording does not stop immediately after you
press x REC STOP.
, It will take a few seconds for the recorder to input
disc data before recording can stop.
Recording does not stop after you press x.
,
Open the remote’s cover and press
x
REC STOP.
Timer recording is not complete or did not start
from the beginning.
, There was a power failure during recording. If
the power recovers when there is a timer
recording, the recorder resumes recording.
Should the power failure continue for more than
1 hour, reset the clock (page 89).
, Other timer setting overlapped the timer setting
(page 57).
, Disc space was not enough.
Contents previously recorded were erased.
, Data that has been recorded on a DVD with a PC
will be erased from the disc when the disc is
inserted.
, “Auto Title Erase” in the TOOLS menu (appears
when you press TOOLS while the Timer List
menu is turned on) is set to “On” (page 57).
,
The title was updated and recorded over (page 50).
Nothing was recorded even though you set the
Synchro-Rec setting correctly.
,
You forgot to turn off the connected equipment.
Turn off the connected equipment and set the
recorder to Synchro-Rec standby mode (page 58).
, The recorder was not set to the Synchro-
Recording standby mode. Press SYNCHRO
REC to have the recorder stand by for recording.
Make sure the SYNCHRO REC indicator lights
up on the front panel (page 58).
, The recorder is connected to the TV output jack
of the connected equipment.
Recording/Timer recording/
Editing
Recording from the equipment
with a timer
,continued