Sony KDF-60XBR950 Projection Television User Manual


 
Installing and Connecting the LCD Projection TV
26
Cable or Antenna
Only
For best results, use one of the following connections if you are
connecting a cable or an antenna and you:
Do not need a cable box to unscramble channels. (If you have a cable
box, see pages 28 to 30.)
Do not intend to connect a VCR. (If you have a VCR, see pages 32 and
33.)
The connection you choose depends on the cable type you have in your
home, as described below.
75-ohm coaxial cable (usually found in newer homes)
Cable Type Connect As Shown
VHF Only or
combined VHF/
UHF
Cable
300-ohm twin lead cable (usually found in older homes)
Cable Type Connect As Shown
VHF Only or
UHF Only or
combined
VHF/UHF
75-ohm coaxial and 300-ohm twin lead cable (found in some homes)
Cable Type Connect As Shown
VHF and UHF
75-ohm coaxial
cable
Rear of LCD
projection TV
VHF/UHF
75-ohm coaxial
cable
CABLE
Rear of LCD
projection TV
Rear of LCD projection TV
Antenna connector
(not supplied)
300-ohm twin lead cable
VHF/UHF
Rear of LCD
projection TV
75-ohm coaxial cable
VHF/UHF
U/V mixer
(not supplied)
300-ohm twin lead cable