Filter
Top Products
Using the Features
52
Watching the TV
Many TV features can be accessed directly through the remote control. The
following will explain the function of some of the buttons found on your
remote control.
Buttons for LCD
Projection TV
Operations
1 FUNCTION
Press until the TV indicator lights up.
This activates the remote control for use with the LCD projection TV.
2 ANT
Press to change between the VHF/UHF input and the CABLE input.
3 POWER
Press to turn the LCD projection TV on and off. If a video input indication
(e.g., VIDEO 1, VIDEO 2) appears on the screen, press
TV/VIDEO or
CH +/ – until a channel number appears.
4 0-9, and ENTER
Use for direct channel selection. Press 0-9 to select an analog channel (for
example, to select channel 10, press 1 and 0). The channel will change after
3 seconds, or you can press ENTER for immediate selection.
For digital subchannels, press 0-9, , press 0-9 again, and then
ENTER.
You can also select digital channels using the digital program guide. See
page 60 for details.
5 CH +/–
Press to scan through the channels (+ up or – down).
6 VOL +/–
Press to adjust the volume (+ up or – down).
7 JUMP
Press to jump back and forth between the current channel and the last
channel selected.
8 MUTING
Press to mute the sound. “MUTING” will appear on the screen and will dim
three seconds later. To restore the sound, press again or press
VOL +.
9 FREEZE
This is useful when you need to copy down information that appears on the
LCD projection TV’s screen (see “Using the Freeze Function” on page 58).
RM-Y1000
z