Filter
Top Products
Using the Features
47
Using the Features
qs ANT
INDEX
Changes between the VHF/UHF input and the CABLE input.
If FUNCTION is switched on SAT/CABLE
Displays index of your satellite program provider.
qd VOL +/– Adjusts the volume.
qf POWER
buttons
(Green)
Turn on and off the LCD projection TV and other audio/video
equipment you have programmed into the remote control. For
instructions, see “Programming the Remote Control” on page
48.
qg REC
RESET
Record
Press when in a menu to reset the settings to the factory
defaults.
qh TV/VIDEO
Cycles through the video equipment connected to your
LCD
projection TV
’s video inputs:
TV
,
VIDEO 1
,
VIDEO 2
,
VIDEO 3
,
VIDEO 4
,
VIDEO 5, VIDEO 6
and
VIDEO 7
.
qj DISPLAY Press once to display the current time and channel label (if set)
and channel number. Press again to turn Display off. See page
104 for details on setting the time.
qk JUMP Press to jump back and forth between two channels. The LCD
projection TV alternates between the current channel and the
last channel that was selected.
ql 0 – 9 and
ENTER
Press 0 - 9 to select a channel, the channel changes after 3
seconds. Press ENTER to select immediately.
w; FAVORITES Displays the Favorite Channels list. For details, see “Using
Favorite Channels” on page 54.
wa FREEZE Freezes the window picture. Press again to restore the picture.
ws i.LINK Press to display the i.LINK Control Panel. For information on
using the i.LINK Control Panel, see page 83.
wd
MEMORY
STICK
Press to display the Memory Stick Menu.
For details, see “Using the Memory Stick Viewer” on page 64.
wf MENU Press to display the LCD projection TV on-screen menu. Press
again to exit from the menu.
wg CH +/– Scan through channels.
To scan rapidly through the channels, press and hold
down CH+ or CH–.
wh EXIT Press to exit the on-screen menu or display and return to
normal viewing.
Button Description
z