Filter
Top Products
11
RS-232C/RS-485 Interface
When the personal computer is connected to the RS-
232C or RS-485 connector, the transmission speed
(baud rate) can only be set using the GENERAL SET
menu.
1 Select the RS-232C or RS-485 connector to be
used using the RS-485/RS-232C switch at the rear.
2 Turn on the power of the equipment to be used.
3 Press MENU and MENU
V
until “4” of the MAIN
MENU flashes on the monitor screen.
4 Press MENU
B
.
The GENERAL SET menu appears.
5 Press
MENU V
to move the flashing to BAUD
RATE and set the baud rate (19200, 2400, 4800 or
9600 bps) by pressing
MENU + or –
.
6 Press SEARCH to return to the normal display.
APC
THREAD CHECK
T
/
D SEARCH
ON
OFF
CONVENTION
19200BAUD RATE
SELECT : DATA SET :
+
/
–
RETURN : MENU
<
NEXT PUSH
>
GENERAL SET
TAPE
TAPE IN
TAPE END
MODE
MODE
TAPE USED COUNT
CLOCK ADJUST
APC
THREAD CHECK
T
/
D SEARCH
T–160
STOP
REW
OFF
01:00
ON
OFF
CONVENTION
19200
SELECT : DATA SET :
+
/
–
RETURN : MENU
<
NEXT PUSH
>
BAUD RATE