Filter
Top Products
42
3 Press REC/PLAY SPEED + or – to set the date
and press MENU B to move the flashing to the
time. Press + or – to set the time.
4 Press FF M or REW m.
The cassette stops at the portion when you set the
time and date and the still picture playback is
displayed.
The time/date search mode is automatically
cleared.
Notes
• If the tape reaches its end during searching, the tape is
rewound and the unit enters the stop mode at the beginning
of the tape.
• Be sure to set T/D SEARCH on the GENERAL SET menu
to the same setting as the tape was recorded with.
Otherwise, searching for the time and date cannot be done
properly.
Searching for the Time and Date — Time/Date Search