Filter
Top Products
47
CLOCK SET IN/OUT Terminals
You can set the clock of this unit using an external
switch.
When you use one unit as the master VCR, you can set
the clock of the units connected to the master VCR
using the master VCR.
When Using an External Switch
Master VCR
to CLOCK SET IN
to CLOCK SET IN
to CLOCK SET OUT
to CLOCK SET OUT
External switch
to CLOCK SET IN
to COM
When Using One Unit as a Master VCR
4
Press MENU V to move the flashing to the setting
of
MODE
of SW OUT and set to
FIELD or
FRAME
by
pressing MENU + or – and press
MENU V
again.
5 Set TIMING by
pressing MENU + or – and press
MENU V
.
6 When TAPE in the GENERAL SET menu is set
to T-120:
Set 6H (6-hour mode) MODE to ON or OFF by
pressing
MENU + or –
.
ON: a signal is output in the 6-hour mode
OFF: a signal is not output in the 6-hour mode
When TAPE in the GENERAL SET menu is set
to T-160:
Set 8H (8-hour mode) MODE to ON or OFF by
pressing
MENU + or –
.
ON: a signal is output in the 8-hour mode
OFF: a signal is not output in the 8-hour mode
7 Press SEARCH to return to the normal display.
BUZZER ALARM IN ON
TAPE END ON
KEY IN OFF
SW OUT MODE FIELD
TIMING 01
6H MODE ON
SELECT : DATA SET :
+
/
–
RETURN : MENU
<NEXT PUSH >
TAPE
END ON
KEY IN OFF
SW OUT MODE FIELD
TIMING 04
6H MODE ON
SELECT : DATA SET :
+
/
–
RETURN : MENU
<NEXT PUSH >
to CLOCK SET IN
to CLOCK SET IN
to CLOCK SET OUT
to CLOCK SET OUT