Filter
Top Products
57
Specifications
Connector
Alarm input Low level
Alarm output +5 V, 5.7 kΩ (Low active)
Switch output +5 V, 5.7 kΩ
Tape end output +5 V, 5.7 kΩ (Low active)
Warning output +5 V, 5.7 kΩ (Low active)
External timer input
Low level
Clock set output +5 V, 5.7 kΩ (Low active)
Clock set input Low level
Series output +5 V, 5.7 kΩ (Low active)
Series input Low level
Remote control input
ø3.5 mm stereo minijack
Other specifications
Operating temperature range
5°C to 40°C
Operating humidity range
80% or less
Power supply 120 V AC, 60 Hz
Power consumption
17 W
External dimensions
Approx. 420 × 100 × 300 mm
(w/h/d)
(16
5
/8 × 4 × 11
7
/8 in.)
Mass Approx. 4.3 kg (9 lb 6 oz)
Supplied accessory
AC power cord (1)
Operating instructions (1)
Optional accessories
SVT-RM10 Remote Control Unit
Design and specifications are subject to change
without notice.
General
Recording method Dual-head rotating helical scanning
system
Tape speed 11.12 mm/sec (6 or 8-hour mode)
Specified video cassette tape
VHS 1/2 inch video cassette tape
Recording/playback time
6, 18 and 30 hours
(when using T-120 tape)
8, 24 and 40 hours
(when using T-160 tape)
Fast-forward/rewind time
Approx. 100 seconds
(when using T-120 tape)
Colour system NTSC colour
Video
Recording method Luminance signal: FM method
Colour signal: Subcarrier low
frequency conversion methed
Input BNC: 1 Vp-p, 75 Ω unbalanced
Output BNC: 1 Vp-p, 75 Ω unbalanced
Horizontal resolution
Black & white mode: 350 lines
Colour mode: 300 lines
S/N 44 dB
Audio
Input –8 dBs, phono jack
47 kΩ unbalanced
Output –8 dBs, phono jack
600 Ω unbalanced
Microphone input –60 dBs,
ø3.5 mm minijack,
600 Ω
S/N 42 dB