Filter
Top Products
22
Recording
6 Press SEARCH to return to the normal display.
7 Press REC z.
Recording begins.
Note
If the REPEAT REC switch is set to OFF while repeat
recording is in progress, recording proceeds until the end of
the tape is reached and then stops automatically after the
tape is rewound to the beginning. The OFF indicator lights
in the display window.
To return to the MAIN MENU screen from the
current menu
Press MENU again.
To go to the next menu from the current menu
Press MENU
V
until “NEXT PUSH
B
” flashes and
press MENU
B
.
Series Recording
Connect another SVT-40E for series recording (for
details on connection, see page 9) and set each of the
units as follows.
Item Unit #1 Unit #2 Unit #3 and
subsequent
unit
SERIES REC on ON ON ON
ALARM SET menu
TAPE END WARN. on COUNTER COUNTER COUNTER
ALARM SET menu
Cassette tape Loaded Loaded Loaded
Operating status Recording Turned off Turned off
REPEAT REC OFF OFF OFF
Security lock Locked Locked Locked
Timer recording
Deactivated Deactivated Deactivated
When all of the settings are complete, set unit #1 in
recording mode and turn off the power of unit #2 and
subsequent unit.
When recording on unit #1 is complete, the power for
unit #2 turn on and recording begins (The recording
cannot be done for about 11 seconds.).
The unit #1 rewinds its tape and turns off.
When a T-120 or T-160 tape is used and TAPE END
WARN. is set to COUNTER, the unit #2 starts
recording before the unit #1 stops so that recording is
continued without stop.
Note
For series recording, set SERIES REC in the ALARM SET
menu to ON. If it is set to OFF, recording cannot be done
even if a signal is input to the SERIES IN terminal.