Filter
Top Products
TL H.264 DVR User’s Manual
53
5.1.6.3 Trigger Port
To avoid the possibility of the default service port (port 100) being blocked,
this item enables the user to change port 100 into another port. To change the
trigger port, move the cursor over <Trigger Port> and press ENTER, then
adjust the setting by UP / DOWN keys.
5.1.6.4 Email Address
This item is used to edit the e-mail address where alarm event information will
be sent. Follow these steps to setup the e-mail address.
• Select <Email Address> from Network Setup menu and press ENTER. A
virtual keyboard displays.
• Use Direction keys to move the cursor for selecting from characters.
• Press ENTER to add the selected character to the entry field.
• When it’s done, move the cursor to <OK> and press ENTER to save the
settings and exit.
5.1.6.5 SMTP Setup
Simple Mail Transfer Protocol (SMTP), a protocol for sending e-mail
messages between servers. SMTP is a relatively simple, text-based protocol
that one or more recipients of a message are specified and the message text
is transferred.
Select < SMTP Setup> from Network Setup menu and press ENTER; the
menu displays as follows.
SMTP Setup
1. Email via SMTP
2. SMTP Server
3. SMTP Port
4. SMTP Account
5. SMTP Password
ON
25
Email via SMTP
The item enables users to determine if the DVR sends e-mail via SMTP.
Select <ON> to send e-mail via SMTP using direction keys; if not, select
<OFF>.