Filter
Top Products
TL H.264 DVR User’s Manual
68
• Select <Average Normal PPS> and press ENTER, then press UP/DOWN
to choose a desired number of PPS. The <How Many Days To Record>
will be computed automatically.
• Select <Average Normal Quality> and press ENTER, then press
UP/DOWN to select a desired quality. The <How Many Days To Record>
will be computed automatically.
NOTE: The current number of connected cameras will affect the
recording quality automatically calculated by the <ezRecord
Setup>. Therefore, when there are cameras disconnected or
connected, the <ezRecord Setup> should be reset.
5.4.6 Data Lifetime
Data Lifetime indicates the duration that a video is saved and recallable in the
HDD. Only those video recorded during Data Lifetime can be retrieved for
playback. The video exceeded Data Lifetime will be hidden and cannot be
retrieved for playback. Press ENTER to select this item in Record Setup
menu, and then use UP / DOWN keys to set the data lifetime. The value
ranges from <1> to <365> days, or select <0> to disable the function.
NOTE: If users want to playback a video which is beyond the data
lifetime, please extend the duration till the recording data/time of the
video is included.
5.4.7 Circular Recording
Users can choose to record video in circular mode or in linear mode. If
circular mode (set to <ON>) is selected, the DVR will store new video data to
overwrite the oldest recorded video. If linear mode (set to <OFF>) is selected
instead, the DVR will stop recording when HDD capacity is full, and the
internal buzzer will start beeping.
From the Record Setup menu, move the cursor to <Circular Recording> and
press ENTER, then select <ON> / <OFF> using UP / DOWN keys.