Filter
Top Products
TL H.264 DVR User’s Manual
83
6. Remote Monitoring Software
The remote monitoring software SpecoRemote is a remote browser-based
software application designed to operate with the DVR products. Using the
software, users are allowed to view live and recorded video, and configure the
DVRs remotely via a LAN, WAN or Internet on a personal computer.
The connected PC will automatically download SpecoRemote plug-ins from
the DVR when the DVR is connected by entering its IP address in the address
bar on the browser.
Due to the setting items are similar to those listed in the DVR’s OSD setup
menu, please refer to the chapter Advanced System Configuration
for
setting configuration of SpecoRemote.
The tasks can be performed with SpecoRemote are listed below:
• Remote viewing of live/ recorded video
• Remote setup of the DVR
• Remote control of dome cameras
• Alarm notification from the DVR
• Up to five connections to one DVR using SpecoRemote, including the
preset “admin” and four other accounts
6.1 System Requirements
Items Minimum Requirements
Minimum:
Intel® Pentium® M CPU 1.40GHz
RAM 512 MB
Personal Computer
Recommended:
Intel® Core™2 Quad CPU Q6600 @ 2.4GHZ
RAM 2 GB
Hard Disk Drive Requires 20 MB for software installation
Operating System Windows XP, Windows Vista
Web Browser Microsoft Internet Explorer version 6.0 or above
Monitor Resolution Minimum 1024 x 768 with 16-bit color
Network Card
10Base-T (10 Mbps) or 100Base-TX (100 Mbps)
operation; must match the network configuration