Speco Technologies 8TL DVR User Manual


 
TL H.264 DVR User’s Manual
57
ezDDNS
ezDDNS enables the users to register for host name automatically. Press
ENTER and select <Yes>. The following screen will be displayed:
ezDDNS Submit/update ok!
Host name is XXXX_XXXXXX
Press any key to return
NOTE: The DVR must be connected to the *Real IP address, or be
assigned a specific port using **Port Forwarding technique.
*A "Real IP" is the IP address that is assigned by users’ ISP.
**A "Virtual IP" is the IP address assigned either manually or through
DHCP. When the user is assigned a Virtual IP, the user must use Port
Forwarding technique to assign a specific port to the DVR.
5.1.7 RS485 Setup
This menu allows the user to setup the parameters of the unit’s RS-485
communications port. From the System Setup menu, select <RS485 Setup>
and press ENTER. The following menu is displayed.
RS485 Setup
1. Unit ID
2. Baud Rate
3. Bits
4. Stop
5. Parity
224
9600
8
1
None
5.1.7.1 Unit ID
This item is used to change the RS-485 ID address of the DVR. The ID is in
the range of <1> to <255>.
5.1.7.2 Baud Rate
The Baud rate options for associated with the protocol are <2400>, <4800>,
<9600>, <19200>, <38400>, and <57600>..
5.1.7.3 Bits
Users can specify the bits in a word associated with this protocol. The
available options are <6>, <7> and <8> bits.