Filter
Top Products
TL H.264 DVR User’s Manual
86
6.2.2 Install SpecoRemote
Start the browser to initiate the installation of SpecoRemote on the PC. The
IP address of the DVR can be saved as a Favorites item in the web browser
to enable easy access in the future.
• Start the IE; it can be started either by clicking on the desktop icon, or by
using the Start menu to access it.
• Enter the IP address of the DVR in the address bar at the top of the
browser.
• The ActiveX controls and plug-ins dialog will show twice for confirmation;
click <Yes> to accept ActiveX plug-ins. SpecoRemote plug-ins will be
downloaded and installed on the PC automatically when the connection is
successfully made.
NOTE: Do not enter any leading “0” characters in the address, for
example, “192.068.080.006” should be entered as “192.68.80.6”.
If the default trigger port 80 is changed into another one, take port
81 for example, the IP address should be entered as
“192.68.80.6:81”.
• A version check starts to verify whether SpecoRemote was installed
already, and also check if the version is the same as that stored in that
particular DVR. This process may take up to 30 seconds.
• When the software is completely downloaded and installed, the Login
Screen is now displayed.