Speco Technologies 8TL DVR User Manual


 
TL H.264 DVR User’s Manual
84
6.2 Installation of Software
Refer to the following description to install SpecoRemote.
6.2.1 Change Internet Settings
The PC operating with SpecoRemote should be set to accept ActiveX
plug-ins. Please follow the steps to set the Internet security settings
appropriately.
Before operating SpecoRemote, please check the IP address of the DVR.
To check the IP address, press MENU key on the unit and enter password
to access OSD setup menu. Select <System Setup>, <Network Setup>,
then <LAN Setup> to check the IP.
Start the IE; it can be started either by clicking on the desktop icon, or by
using the Start menu to access it.
NOTE: Windows IE provides the ActiveX component that is
required when using SpecoRemote.
Select <Tools> from the main menu of the browser, then <Internet
Options>, and then click the <Security> tab.
Select <Trusted sites> and click <Sites> to specify its security setting.