Filter
Top Products
TL H.264 DVR User’s Manual
73
5.6.7 Per Channel Config
This menu is used to set the Video Loss Detect, Motion Detect and Alarm In /
Out function for each channel. The menu is displayed as below.
Per Channel Config
1. Channel Select
2. Video Loss Detect
3. Motion Detect
4. Motion Detect Indicator
5. Detection Config
6. Alarm In
7. Alarm Out
CH1
OFF
OFF
ON
OFF
None
5.6.7.1 Channel Select
The item is used to select a desired channel for setting the parameters. Move
the cursor to <Channel Select> and press ENTER, then select a channel
using UP / DOWN keys. Press ENTER again to confirm the selection.
5.6.7.2 Video Loss Detect
This item allows users to enable or disable Video Loss as an alarm event.
Select <ON> to enable Video Loss alarm events, or <OFF> to disable.
5.6.7.3 Motion Detect
This item allows users to enable or disable motion detection function of
DVR-4TL/8TL/16TL. Select <ON> to enable Motion Detect alarm events, or
<OFF> to disable. If motion detection function is enabled, it is required to
define motion detection parameters such as detection area and sensitivity
settings in <Detection Config>.
5.6.7.4 Motion Detect Indicator
This item allows users to display/ hide the motion detection indicators. Select
<ON> to display the indicators, or <OFF> to hide them.