Filter
Top Products
TL H.264 DVR User’s Manual
65
5.4.3 Preset Record Configuration
The <Preset Config> is used to select the preset recording quality and frame
rate. Different preset recording quality levels are offered for users to choose:
<Best Quality>, <Standard>, <Extended Record>, <Event Only>, <ezRecord
>, <512Kbps DSL>, <256Kbps DSL>, <128Kbps DSL>, and <OFF>.
According to various Record modes, the preset configuration options for
normal and event status are described in terms of relative recording rate PPS
(Picture Per Second) and recording size for each channel in the table below.
These preset conditions <Best Quality>, <Standard>, <Extended Record>,
<Event Only>, <ezRecord >, <512Kbps DSL>, <256Kbps DSL>, and <
selected, the channels not connected to cameras will not be recorded.
In128Kbps DSL> override any other quality and rate settings. Refer to the
table below for file sizes of different preset conditions for DVR-16TL. Note
that <Event Only> and <ezRecord> are not included in the table because
there are further details for these two settings. <Event Only> will be described
in <Event Setup> section. <ezRecord> will be explained in <ezRecord Setup>
section.
NTSC 720 X 480 @ 60PPS
720 X 240 @ 120PPS
360 X 240 @ 240PPS
PAL 720 X 576 @ 50PPS
720 X 288 @ 100PPS
360 X 288 @ 200PPS
Best
22 KB/Pic 12 KB/Pic 6 KB/Pic
Standard
14 KB/Pic 8 KB/Pic 4 KB/Pic
Extended
6 KB/Pic 4 KB/Pic 2 KB/Pic
512Kbps DSL
4 KB/Pic
256Kbps DSL
3 KB/Pic
128Kbps DSL
2 KB/Pic
NOTE: The total PPS is equally shared by all channels, which means,
even if one channel has not been connected with a camera, the
channel still reserves its share of PPS. However, if <ezRecord> is
other words, the total PPS will be shared by channels with cameras
connected only.