Filter
Top Products
SRC-7000 User’s Manual
26
When you have successfully added a new device, and want to
learn the codes for the device, choose the “Learning” item to
program the unit.
1. 2.
1. Decide the “Device Category” for your device by pressing the
or buttons. Press the to confirm and enter to
next step.
2. Decide how you will load the IR remote codes for the device.
Select “Learning” press
to confirm.
=
3.
3. The first page will guide you to learn the rubber keys on SRC-
7000. The specific key needs to be learned will be shown in black
on the LCD. The SRC-7000 will automatically guide you to learn
the remote code for each key one by one. However, you can also
change the sequence by tapping any key you want to learn.
Before starting learning, have your original remote pointed to the
“Learning Eye” located at the bottom of the SRC-7000. Please
refer to Figure 3-1 on last page.