Filter
Top Products
SRC-7000 User’s Manual
38
1. 2. 3.
1. Press the button for 2 seconds to enter the Setup Menu, then
enter the “Code Setting” menu.
2. Select the “
Learning” item then press the button to enter
the submenu. You will need to see the help guide for the learning
function. After reading the tips, please press the
button to go
to the next step.
3. Select the device for which you want to learn the remote codes.
=
4. 5.
4. The first page will guide you to learn the rubber keys on SRC-7000.
Before starting learning, have your original remote pointed to the
“Learning Eye” located at the bottom of the SRC-7000 for 2-4 inches
apart. Please refer to the picture on last page. The specific key
needs to be learned will show in black on the LCD.
The first page you see will guide you to learn each remote
code for the rubber keys on the SRC-7000.
5. The SRC-7000 will automatically guide you to learn the remote code
for hard key to soft key. However, you can also change the sequence
by tapping any key you want to learn.