Filter
Top Products
Chapter 4 Menus
57
4.3 Code Setting
Pre-code
Use to load the pre-programmed codes for your devices.
(Please refer to 3.7 Pre-programmed Code on page 35).
Learning
Use this function to learn the IR codes from your remotes.
(Please refer to 3.8 Learning on page 37).
Macro
Use to add Normal Macros to your SRC-7000.
You can use all keys except device keys as your Normal
Macros.
*You cannot set a timer for a Normal Macro.
(Please refer to 3.11 Create a Macro on page 42).
Cycle
Use to add Cycle keys to your SRC-7000.
(Please refer to 3.9 Learn a Cycle Key on page 40).
Del. Code
Use to remove the codes set for the devices or keys.
Using this will not erase the keys.
(Please refer to 3.10 Delete Device/Key Codes on page 41).