Filter
Top Products
D14635.02—MARCH 2010
11
TANDBERG Codec C90 and Profiles using C90
Administrator guide
Contents Introduction Advanced configuration Password protection About monitors Audio matters Appendices Contact us
www.tandberg.com
Audio Input HDMI [3, 4] Level
Defines the input level of the selected HDMI input connector in steps of 1dB from -24dB to 0dB.
See the Audio Level tables in the Physical Interfaces Guide for the codec for a complete overview of the
menu values represented indB.
Valuespace: <-24..0>
Range: -24 to 0dB
Example: Audio Input HDMI 3 Level: 0
Audio Input HDMI [3, 4] Mode
Determines whether or not the audio channels on the HDMI input should be enabled. The HDMI input 3
and 4 have two audio channels.
Valuespace: <On/Off>
On: Set to On to enable the audio channels on the selected HDMI input.
Off: Set to On to disable the audio channels on the selected HDMI input.
Example: Audio Input HDMI 3 Mode: On
Audio Input HDMI [3..4] VideoAssociation MuteOnInactiveVideo
Enable association of a video source to a HDMI audio input.
Valuespace: <On/Off>
On: A video source is associated, and the audio will be muted if the associated video source is not
displayed.
Off: No video source is associated.
Example: Audio Input HDMI 3 VideoAssociation MuteOnInactiveVideo: Off
Audio Input HDMI [3..4] VideoAssociation VideoInputSource
Select the associated video input source.
Valuespace: <1/2/3/4/5>
Range: Select one of the five video input sources for the selected HDMI input.
Example: Audio Input HDMI 3 VideoAssociation VideoInputSource: 1
Description of the advanced configuration settings
In the following pages you will find a complete list of the system settings which are configured from
the Advanced configuration menu. Open the Home menu on screen and go to: Settings > Advanced
> Advanced configuration. The examples shows either the default value or an example of a value.
Audio Input Line [1..4] Equalizer ID
Select equalizer ID[1...8].
Valuespace: <1..8>
Range: Select EqualizerID 1 to 8.
Example: Audio Input Line 1 Equalizer ID: 1
Audio Input Line [1..4] Equalizer Mode
Determines whether or not the selected equalizer is enabled.
Valuespace: <On/Off>
On: Use the selected equalizer
Off: No equalizer
Example: Audio Input Line 1 Equalizer Mode: Off
Audio Input Line [1..4] VideoAssociation MuteOnInactiveVideo
Enable association of a video source to a Line audio input.
Valuespace: <On/Off>
On: A video source is associated, and the audio will be muted if the associated video source is not
displayed.
Off: No video source is associated.
Example: Audio Input Line 1 VideoAssociation MuteOnInactiveVideo: Off
Audio Input Line [1..4] VideoAssociation VideoInputSource
Select the associated video input source.
Valuespace: <1/2/3/4/5>
Range: Select one of the five video input sources for the Line input.
Example: Audio Input Line 1 VideoAssociation VideoInputSource: 1
Audio Input Line [1..4] Channel
Defines whether the Audio Line input is a mono signal or part of a multichannel signal.
Valuespace: <Left/Right/Mono>
Left: The Audio Line input signal is the left channel of a stereo signal.
Right: The Audio Line input signal is the right channel of a stereo signal.
Mono: The Audio Line input signal is a mono signal.
Example: Audio Input 1 Channel: Left
The Audio settings
The Audio settings, continued...
Contact us
Contents
Introduction
Advanced configuration
Password protection
About monitors
Audio matters
Appendices
Advanced config.