Filter
Top Products
D14635.02—MARCH 2010
31
TANDBERG Codec C90 and Profiles using C90
Administrator guide
Contents Introduction Advanced configuration Password protection About monitors Audio matters Appendices Contact us
www.tandberg.com
Video Input Source [1..5] CameraControl Mode
Determines whether or not the camera control should be enabled for the selected video input source.
Valuespace: <On/Off>
On: Set to On to enable camera control for the camera connected to the selected video input
connector.
Off: Set to Off to disable camera control for the camera connected to the selected video input
connector.
Example: Video Input Source 1 CameraControl Mode: On
Video Input Source [1] Connector
Select which video input connector to be active on connector group 1. The available options for Source 1
are listed below.
Valuespace: <HDMI/HDSDI/YPbPr>
HDMI: Select HDMI when you want to use the HDMI 1 connector as input.
HDSDI: Select HD-SDI when you want to use the HD-SDI 1 connector as input.
YPbPr: Select YPbPr when you want to use the Y-Pb-Pr (Component) 1 connectors as input.
Example: Video Input Source 1 Connector: HDMI
Video Input Source [2] Connector
Select which video input connector to be active on connector group 2. The available options for Source 2
are listed below.
Valuespace: <HDMI/HDSDI/YPbPr>
HDMI: Select HDMI when you want to use the HDMI 2 connector as input.
HDSDI: Select HD-SDI when you want to use the HD-SDI 2 connector as input.
YPbPr: Select YPbPr when you want to use the Y-Pb-Pr (Component) 2 connectors as input.
Example: Video Input Source 2 Connector: HDMI
Video Input Source [3] Connector
Select which video input connector to be active on connector group 3. The available options for Source 3
are listed below.
Valuespace: <HDMI/HDSDI/DVI>
DVI: Select DVI-I when you want to use the DVI-I 3 connector as input.
HDMI: Select HDMI when you want to use the HDMI 3 connector as input.
HDSDI: Select HD-SDI when you want to use the HD-SDI 3 connector as input.
Example: Video Input Source 3 Connector: DVI
Video Input Source [4] Connector
Select which video input connector to be active on connector group 4. The available options for Source 4
are listed below.
Valuespace: <HDMI/HDSDI>
HDMI: Select HDMI when you want to use the HDMI 4 connector as input.
HDSDI: Select HD-SDI when you want to use the HD-SDI 4 connector as input.
Example: Video Input Source 4 Connector: HDMI
Video Input Source [5] Connector
Select which video input connector to be active on connector group 5. The available options for Source 5
are listed below.
Valuespace: <YC/Composite/DVI>
DVI: Select DVI-I when you want to use the DVI-I 5 connector as input.
YC: Select YC when you want to use the S-Video (YC) input. Connect the S-Video input to the
connector marked as Y/Comp and C.
Composite: Select Comp when you want to use the Composite input. Connect the Composite input to
the connector marked as Y/Comp.
Example: Video Input Source 5 Connector: DVI
Video Input Source [1..5] Name
Customizable name of the connector group. Enter the name of the video input source 1-5.
Valuespace: <S: 0, 50>
Format: String with a maximum of 50 characters.
Example: Video Input Source 1 Name: “”
The Video settings, cont... The Video settings, cont...
Contact us
Contents
Introduction
Advanced configuration
Password protection
About monitors
Audio matters
Appendices
Advanced config.