Filter
Top Products
Reference
28
SDA 601 Serial Digital Analyzer User Manual
Figure 12: The OSD Setups/Horizontal Position Item
Number Entry: In many cases, numbers may be entered directly
from the keypad. In the “Horiz Position” item, for example, you can
enter the desired location with the number keys 0 through 9—see the
following illustration—without first pressing
Shift.
Figure 13: The SDA Number Keys
Note that once the new horizontal coordinate has been entered
through the keypad and is visible on the LCD, you must press
Enter
twice to confirm the change. The first press completes the numeric
entry; the second makes the entry permanent. If you leave the menu
or submenu without confirming the entry with a second press of the
Enter key, the setting will revert to its previous value. Just remember
to press
Enter repeatedly until the asterisk appears.
NOTE. In the menu listings that follow, the factory default for each
item is the first listed option. Defaults for items that can be set within
a range of numeric values are given within square brackets [for
example] on the option line.