Filter
Top Products
Player function
Repeat playback
32
To repeat the playback of a title, chapter, track, scene, selected A-B segment (except on
Video CDs) or entire disc. Your DMR enables you to mark your favourite DVD scenes
or music tracks on audio CDs thanks to a marking function accessible through the
banner.
Repeat playback of a scene between two points
1. Select the Play Mode play function and choose A-B with the Navigation keys.
2. Press
ok
to memorise the beginning of the scene you want to repeat.
3. Wait a few seconds before pressing again on
ok
to mark the end of the sequence to be
repeated (point B).
To stop repeating the sequence, select
Standard with the
Navigation
keys or press STOP.
• Repeat playback remains active as long as
the disk is in the DMR, or as long as the
DMR remains switched on.
• Repeat play only works with discs that show
the elapsed time on the display.
• This may not work correctly with certain
discs (Video CDs in PBC mode).
• If during a fast forward or backward reading
the B point is reached, the DMR will proceed
at normal speed from the A point.
• If during a fast search the A point is reached,
the DMR will start reading at normal speed
from the A point.
• The A-B repeat mode will be cancelled if you
press
STOP
, if the disc is ejected or if
another repeat mode is selected.
Repeat play
During disc playback, press the yellow
info
key to display the banner. Select the
Play Mode icon in the banner using the
Navigation
keys. With the
Navigation
keys, select one of the following functions:
• Standard
• Repeat Title
• Repeat A-B: Press OK to Set A.
• Press OK to Set B.
• Repeat Disc.
DTH7000-EN 23/08/02 10:24 Page 32