Filter
Top Products
1. Turn on your TV set.
2. Turn on your DMR by pressing the STANDBY / ON button (on the front panel).
The first time you turn it on, your DMR will ask you to select a preferred language for the
various displays through the menu which appears on your TV screen. If this menu is not
displayed, on your TV select the AV socket to which you connected your DMR.
3. Position the remote control function selector on dvd.
4.
Choose the language using the remote control Navigation keys
(1)
then confirm by pressing
ok
.
Installation
Initial installation
9
EN
EN
In the following pages, the
Navigation
keys will be
described by the symbols
‡ˆ/…†. (Also refer to
pages 22 to 26).
1.
To take full advantage of your DMR’s TV functions, you must carry out initial
installation settings. These settings are explained on pages 9 to 13. Prior reading of that
section will make this easier. Follow each stage step by step.
The DMR menus as well as the dialogues and subtitles of the DVDs will always be
presented in the language you’ve chosen if it is available on the discs played.
Most menus come with instructions
or explanations.
DTH7000-EN 23/08/02 10:24 Page 9