Filter
Top Products
13
Selecting the
video input
source/On-screen language
selection
Notes:
• Menu languages
supported are English,
French, Spanish, and
Italian.
• If no buttons are pressed
after approximately 60
seconds, the Main Menu
screen disappears.
• All the channels will be
deleted before the
scanning process begins.
• You can cancel the scan
process at any time by
pressing EXIT/CANCEL.
The carriers and the
services stored before
EXIT/CANCEL is pressed
will be stored.
• When the signal from the
broadcasting station is
being updated and you are
watching a digital
broadcast, the channel will
be automatically updated.
Selecting the video input source
1
Press INPUT to view a signal from another device connected to your TV, such as a VCR
or DVD player.
You can select each input source depending on the input jack used to connect your devices.
2
Press to select a video input source, then
press ENTER/CH LIST within 6 seconds.
On-screen language selection
Preparation:
Switch on appliance.
Press TV/DVD to select the TV mode.
Press ATV/DTV to toggle from analog TV or digital TV mode.
1
Press MENU SETUP or DIGITAL MENU
to display the Main Menu screen.
2
Select “Setup”, then press ENTER/CH LIST .
3
Press to select “Language Setup” (unless
you have already selected when the set was first
switched on), then press ENTER/CH LIST .
4
Press to select “Menu Language”, then
press to display the language menu.
5
Press to select your desired language, then
press ENTER/CH LIST .
6
Press EXIT/CANCEL to return to the normal screen.
/
/
/
/