Filter
Top Products
17
Basic operation
Notes:
• If the built-in tuner does
not receive anything (e.g.
if no antenna is
connected) during TV-
operation, then the TV-
unit will change to standby
after approx. 15 minutes.
• This unit only support
NorDig Version 2.0 data
service.
•Press TV/RADIO to
switch to TV, Radio and
Data three service
categories according to
NorDig 2.0 specifications.
Channel selection
Use the 0-9 numbered buttons.
Example:
• No. 2: Press 0 and within 2 seconds, press 2.
• No. 29: Press 2 and within 2 seconds, press 9.
(1) Press CH to select a channel. This takes approx. 2 seconds. If the auto search
only stored 5 stations, only these 5 will appear. Skipped channels will not appear (see
page 15).
The Channel List shows a list of all receivable programmes. They are located in channels
1 to 99 for ATV mode and 1 to 999 for DTV mode.
(2) Press CH LIST to display the Channel List.
(3) Press to select the desired channel, then press ENTER/CH LIST to display
the selected channel.
(4) Press EXIT/CANCEL to exit.
Toggle between the list of TV, Radio and Data services
(1) Press TV/RADIO to switch between the TV, Radio and Data mode.
(2) If you press ENTER/CH LIST when you are in Radio mode the channel list menu will
display the list of Radio services.
If you wish to view the list of Data services without exiting the current menu, press
TV/RADIO once.
If you wish to view the list of TV services without exiting the current menu, press
TV/RADIO twice.
QuickView
Press CH RTN to go back to the last selected channel.
Volume adjustment
Press VOL + / – to adjust the volume level. The volume level indicator shows the current
volume level. The indicator will disappear after 4 seconds of inactivity.
Mute
Press MUTE to switch off the sound. The TV/DVD’s sound will be turned off and “Mute”
will appear on-screen. Press MUTE again or VOL +
/ – to turn the sound on.
/
Analog Channel List DTV Channel List
/