Filter
Top Products
15
Changing the order of stored channels
Note:
• When changing the
order of the channels,
it is best to start with
Ch1.
Changing the order of stored channels
The Automatic station presetting stores the stations in a specific order. However, this order can be
changed if you wish.
1
Press to select “Ch Allocation”, then press
ENTER/CH LIST .
2
Select the desired option, then press ENTER/
CH LIST .
3
After setting each option, press MENU SETUP to
return to Ch Allocation menu.
4
Press EXIT/CANCEL to return to the normal
screen.
Description about each setting option:
• Sort: Press to select the channel that you want to move, then press ENTER/CH LIST .
Press to select the position that you want to move the channel to, then press
ENTER/CH LIST .
• Erase Program: Press to select the channel that you want to erase, then press
ENTER/CH LIST .
• Lock: This feature enables you to lock any channel you choose by pressing ENTER/CH LIST
, then enter the parental lock password. If you have not set the parental lock password, you
can use the initial password ’0000’.
• Skip: Press to select the channel that you want to skip, then press ENTER/CH LIST .
A mark will appear.
• Ch Label: Press to enter a suitable label for a selected channel, then press . Press
to select character, then press ENTER/CH LIST . The cursor will move to the next
position. Press ENTER/CH LIST to set the channel label.
/
/
/
/
/
/
/