Filter
Top Products
54
Connecting TV to other equipment
1
Connecting aerials and other devices to your TV
Connect the cable TV coaxial cable directly to the aerial input jack on the rear of the TV.
Caution:
Before connecting:
• Make sure to disconnect the appliance from the power supply in order to avoid any potential damage from occurring.
• Make sure to establish the required connection.
• Make sure that connections are properly and correctly attached before connecting the appliances to the power supply.
2
Connecting an audio system
If you have a surround sound amplifier/decoder with a coaxial digital input, you can connect the Coaxial Digital Audio
Output to it, using a suitable coaxial digital lead. This connection carries the audio signal from the set’s Digital channels
only.
Notes:
• The Bass/Treble/Balance adjustments only function with the sound from the TV speakers - it does not affect the audio
output sockets.
• After connecting a Dolby Digital decoder please select in the DVD menu the Dolby Digital (DD) sound track option.
• Several DVDs may be pre-recorded on both sides however only one side contains the Dolby Digital sound track. Please
insert the correct DVD side.
• When a DTS sound track is played the integrated loudspeakers are mute. The DTS sound can only be played digitally
using the digital outlet. DTS decoder is necessary for hearing.
• Digital audio output is active only when receiving DVB-T, not when receiving analog cable TV broadcasting.
(All illustrated cables are not supplied)
Component input
TV (Back side view)
AV (Video,
Audio L/R)
Tuner
Antenna
Video recorder
DVD player
Satellite receiver
Decoder
Satellite
antenna
Audio/video cable
Component cable
Coaxial digital lead
(not supplied)
TV
(Back side view)
Surround sound
amplifier system