Filter
Top Products
32
Playing a disc (continued)
To start playback in stop mode
Press PLAY .
To pause playback (still mode)
Press PAUSE during playback.
To continue playback from still mode
Press PLAY .
To stop playback
Press STOP .
To remove the disc
1
Press EJECT .
2
Wait for the disc drive to eject the disc, then remove the disc from the slot.
Notes:
• If a non-compatible disc is loaded, ‘Incorrect Disc’, ‘Disc region incorrect’ or ‘Enter
Password’ will appear on the TV screen according to the type of loaded disc. In this case,
check your disc again (see pages 30 and 50).
• Some discs may take a minute or so to start playback.
• When you load a disc with the playback side facing backward, ‘Reading’ appears on-
screen but it will be replaced by ‘Incorrect Disc’. Eject the disc and load again making
sure the playback side is now facing forward.
• Some discs may not work the resuming facility.
• Some playback operations of DVDs may be intentionally fixed by software producers.
Since this unit plays DVDs according to the disc contents the software producers
designed, some playback features may not be available. Also refer to the instructions
supplied with the DVDs.
• Do not move the unit during playback. Doing so may damage the disc.
• In many instances, a menu screen will appear after playback of a movie is completed.
Prolonged display of an on-screen menu may damage your television set, permanently
etching that image onto its screen. To avoid this, be sure to press on your remote
control once the movie is completed.
• There may be a slight delay between the button is pressed and the function activates.