Filter
Top Products
23
Other convenience functions (continued)
Main
menu
Selected items Setup hint
Setup Language See page 13.
Timer Setting*
1
*1 Timer Setting option can be configured only when the TV tuner input is set to DTV mode.
View the current time settings. See page 24.
Password Setup*
2
*2 The Password Setup and Display Setup option can be configured only when the TV tuner input is set to DTV mode.
Set password for TV programmes and movies.
Version View the hardware and software version information.
Vertical Position When the Cinema mode is selected (see page 21), you can adjust the vertical pic-
ture position. Press to adjust the vertical position of the picture by up to +10
and downwards by up to -10.
Auto 4:3 Default*
3
*3 Auto 4:3 Default is available only for AUTO picture size setting.
In Component mode, AUTO 4:3 Default is available only for 480i/576i mode.
4:3/16:9 This option selects the default way that a 4:3 signal is shown - either as normal
“4:3” or expanded in the “16:9” mode, according to your preferences.
Display Setup*
2
See page 24.
Auto Shut Off On/Off This option automatically shuts the TV off after 15 minutes of non-operation when
the last viewed TV channel stops broadcasting.
AV Colour*
4
*4 PAL is the colour system used in Australia. NTSC 3.58 is used in the USA, PAL 60 used in Germany handled video recorders, which play NTSC video
tape recording. If the picture shows horizontal stripes, set to Auto.
Auto/
PAL/
SECAM/
NTSC4.43/
NTSC3.58/
PAL60
The AV Colour setting only applies when viewing devices connected to the AV
inputs.
Reset Select “Reset” to reset TV settings to the factory preset values.
(1) Press ENTER/CH LIST
to enter the Reset TV setting screen.
(2) Press to select “Yes”, then press ENTER/CH LIST .
(3) Reset the TV function will now begin, and this unit will automatically turn off.
As the power is not automatically turned on, press to watch TV.
/
/