20
Stereo reception with the built-in analog tuner
The built-in Tuner can detect
and receive NICAM stereo
broadcasts automatically.
Note:
• In case of bad reception,
the stereo sound also can
be disturbed.
NICAM stereo sound reception:
1
Press MENU SETUP to display the Main Menu
screen.
Press to select “Sound“, then
press ENTER/CH LIST .
2
Select “NICAM”, then press to select “Auto”
or “Off”. Select “Off” if you do not want to receive
NICAM sound.
3
Press EXIT/CANCEL to return to the normal screen.
The following types of broadcast are possible with NICAM transmissions
• ‘NICAM ST’ illuminates for approx. 4 seconds when a
NICAM STEREO broadcast signal is received.
• ‘NICAM M1’ illuminates for approx. 4 seconds when a
NICAM MONO A broadcast signal is received.
• ‘NICAM M1/M2’ illuminates for approx. 4 seconds
when a NICAM MONO A and MONO B broadcast
signal is received.
• This will be displayed for approx. 4 seconds if a
NICAM signal is received when the ‘NICAM Off’
option is selected.
Stereo reception
‘STEREO’ illuminates for approx. 4 seconds when a
STEREO broadcast signal is received.
When 2-channel sound reception is available, you can select your preferred audio with the
AUDIO SELECT button.
Each time you press AUDIO SELECT , the sound channel will switch to the alternative
channel available.
NICAM 2-channel sound reception
2-channel sound reception
