Filter
Top Products
Connecting a VCR and antenna, Cable TV or Camcorder
Camcorder
_ _ TVback panel
You will need:
• Coaxial cables
• Standard A/V cables
- If you have a mono VCR, connect L/MONO
on the TV to your VCR's audio out terminal
using the white audio cable only.
• Standard audio cables (If you have a mono VCR)
Note: When you use a Cable box, you may not
be able to use the remote control to program or
access certain features on the TV.
To view the antenna o1"Cable signal:
Select the ANT/CABLEvideo input source on the TV.*
To view basic and premium Cable channels:
Turn OFF the VCR. Select the ANT/CABLEvideo
input source on the TV.* Tune the TV to channel 3 or
4 (whichever channel the Cable box output is set to).
Use the Cable box controls to change channels.
To view the VCR:
Turn ON the VCR. Select the Videovideo input
source on the TV.*
To view the camcorder video:
Select the Videovideo input source on the TV.*
*To select the video input source, press _ onthe
remotecontrol (__._page 21).
Theunauthorizedrecording,use,distribution,or revision
oftelevisionprograms,videotapes,DVDs,andother
materialsis prohibitedunderthe CopyrightLawsof the
UnitedStatesandothercountries,and may subjectyou
to civil and criminal liability.
14