Filter
Top Products
Selecting the video input source to
view
To select the video input source to view:
1 Press @ on the remote control or TV control
panel.
2 And then either:
a) Press 0-5; or
b) Repeatedly press • or • on the remote control
and then press @ to change the input; or
c) Repeatedly press _ on the remote control
or TV control panel to change the input.
The current simaal source displays in the top right
corner of the Input Selection screen.
Note:
* You can label the video input sources
according to the specific devices you have
connected to the TV (_ "Labeling the video
input sources" at right).
* Sources can be "hidden" (_, "Labeling the
video input sources" at right).
, "No Video Signal" will appear randomly on the
screen if no signal is received in video input
mode.
, If CEC device is connected to a HDMI input,
the REGZA-LINK icon will appear.
If a REGZA-LINK device with HDMI
switching capabili D"(e.g. Audio Receiver) is
connected to the HDMI input:
Press _ on the remote or TV control panel
repeatedly to highlight HDMI1 or HDMI2.
If the connected CEC device has any connected
devices, a separate device selection popup window
will appear.
Press @ repeatedly to highlight the desired input
source, and then press E_T.
Note:
* When selecting REGZA-LINK input sources
from the popup window using _, some
REGZA-LINK devices may automatically turn
on.
° When selecting input sources using • or •,
you will have to press @ to actually select a
particular device from the popup window.
Labeling the video input sources
You can label each video input source according to
the type of device you connected to each source, from
the following preset list of labels:
- - (defattlt label)
Audio Receiver
Cable
Compact Disc
DTV
DVD
Game Console
HDMI Switch (HDMI inputs only)
Laser Disc
Satellite/DS S
VCR
Video Recorder
Hide (to hide an unused input in the InputSelection
screen and in the Channel Browser TM Inputs list)
Note: If you select PC in the Input Selection
screen, you can choose only "- -", "Game
Console", or "Hide" as the label.
To label the video input sources:
1 Press M_u and open the Preferences menu.
2
Highlight Inpflt Labeling and press @.
29