Filter
Top Products
5 To save the new settings, highlight Doneand press
@. To revert to the factory defaults, highlight
Reset and press @.
Displaying TV status information
To display TV status information using
RECALL:
Press _ on the remote control.
The following inl\_rmation will display (if
applicable):
• Current input (ANT[CABLE,Video, etc.)
• If ANT/CABLE is the current input, either
"CABLE" (for cable TV) or "ANT" (for over-the-
air broadcasts).
• Channel number (if in ANT/CABLEmode)
• Channel label (if applicable)
• Digital signal strength indicator (bar graph in lower
right corner of box; for ATSC signal only)
• Stereo, Mono, or SAP audio stares (when HDMI
input mode, Dolby Digital or PCM)
• Video resolution
• Aspect ratio of incoming video signal (4:3 or 16:9)
• V-Chip rating stams
• Game Timer (if set)
To close the RECALL screen:
Press ! again.
To display TV status information using
INFO:
Press [_o on the remote control.
The following additional information will display for
off air digital channels (if applicable):
• Title
• Duration
• Detailed description
Note: The location of the banner can be moved
to the top or bottom of the screen by pressing
• or • while the RECALL or INFO display is
onscreen.
Understanding the last mode
memory feature
If power is lost while you are viewing the TV_the
Last Mode Memory feature automatically turns on
the TV when power is restored.
Note: If you will be away from the TV for an
extended period of time you should unplug the
power cord.
50