Filter
Top Products
* To view the hidden areas (such as subtitles or
captions), see below "Scrolling the TheaterWide®
picture (TheaterWide 2 and 3 only)".
Scrolling the TheaterWide ®
picture (TheaterWide 2 and 3 only)
You can set separate scroll settings for the
TheaterWide 2 and TheaterWide 3modes for each
input.
To set the scroll settings:
1 Press M_u and open the Picture menu.
2 Highlight Theater Settingsand press @.
4
5
In the Picture Sizefield, select either
TheaterWide2 or TheaterWide 3 (you cannot
scroll in any other mode).
Press • to highlight the Picture Scroll field.
Press _ or _" to scroll the picture up and down as
needed.
6 To save the new settings, highlight Doneand press
@. To revert to the factory defaults, highlight
Reset and press @.
Note: When receiving a signal at 480i resolution,
the picture scroll function may have limited
adjustment range.
Usingthe auto aspect ratio feature
When the auto aspect ratio feature is set to On,the TV
will automatically select the picture size when one of
the following input sources is received:
• A 480i, 480p, 720p, 1080i digital signal from the
ANT/CABLEinput
• A 480i signal from theVideo or ColorStreamHD
input
• A 480i, 480p, 720p, 1080i, 1080p, orVGA (60Hz)
signal from the HDMI1/HDMI2 input
4:3 normal Normal (with sidebars)
4:3 letter box TheaterWide 2
16:9 full Full
Not defined (no The current picture size you set
ID-1 data or under "Selecting the picture
HDMI aspect data) size" on page 33.
Note: The auto aspect ratio feature is not
applicable to PC input.
To turn on the auto aspect ratio feature:
1 Press _u and open the Picture menu.
2 Highlight TheaterSettingsand press @.
3 In the Auto Aspect Ratio field, select On.
4 To save the new settings, highlight Doneand press
@. To revert to the factory defaults, highlight
Reset and press @.
To turn off the auto aspect ratio feature:
Select Off in step 3 above.
Selecting the cinema mode
When you view a DVD (3:2 pulldown processed)
from a DVD player connected to the Video,
ColorStream HD (component video), or HDMI inputs
on the TV, smoother motion can be obtained by
setting the Cinema Mode to Film.
To set the Cinema Mode to Film:
(available for 480i and 1080i signals)
1 Press ,_u and open the Picture menu.
2 Highlight TheaterSettingsand press @.
3 In the Cinema Mode field, select Film.
4 To save the new settings, highlight Done and press
@. To revert to the factory defaults, highlight
Reset and press @.
To set the Cinema Mode to Video:
SelectVideoin step 3 above.
35