Toshiba 24SL410U Flat Panel Television User Manual


 
Note:
* These functions depend on the devices that
are connected.
, The REGZA-LINK Player Control item will be
grayed out in the following conditions:
- A non-HDMI input is currently selected.
- The Enable REGZA-LINK item is set to Off.
REGZA-LINK® input source selection
Ifa REGZA-LINK device with HDMI switching
capability (e.g. Audio Receiver) is connected to the
HDMI input, you can select another REGZA-LINK
device that is connected to the master HDMI device
using the TV's _ button. See page 29 for details.
VOLUMEand MUTE controls of Audio
Receiver
With your TV's remote control, you can adjust or
mute the sound volume of the Audio Receiver.
• _ IV_°LJadjust the volume level.
• _ turns off the sound.
Note:
• To use this function:
- Set Speaker Preference to Audio
Receiver in the REGZA-LINK Setup menu.
- Confirm that a connected REGZA-LINK
device (such as DVD player, etc) is selected
for the Audio Receiver input source.
• You can also use this function when the audio
receiver is connected to the TV's DIGITAL
AUDIO OUT terminal (not HDMI connection).
In this case, select a digital audio input mode
on the Audio Receiver.
• These functions depend on the device
connected.
Other REGZA-LINK® functions
When the Enable REGZA-LINKand each item in the
REGZA-LINKSetupmenu are set to On,the following
functions will be enabled.
!N _; geN _ N;n
If a connected HDMI device starts
TV Auto Input playing video or audio, the TV will
Switch automatically switch to the
appropriate HDMI input.
TV Auto If a REGZA-LINK device is turned
Power on, the TV turns on automatically.
If the TV is turned off the TV will
Device Auto send a message to turn off all of the
Standby REGZALINK devices connected to
the TV.
From this item, you can set your
audio output preference to the TV
speakers or the audio receiver
speakers. When this item is set to
Speaker Audio Receiver, the TV remote can
Preference be used to adjust or mute the
volume of the audio. This item will
be grayed out unless a REGZA-
LINK compatible audio receiver is
connected.
Note: When you turn on the Audio Receiver,
change its input source, or adjust the sound
volume, the sound will be output from the audio
receiver's speakers even if TV Speakers has
been selected. Turn the TV off and on again to
output the sound from the TV speakers.
To set the REGZA-LINK (")Setup:
1 From the Setup menu, highlight REGZA-LINK
Setup and press @.
2 Press or to highlight EnableREGZA-LINK.
3 Press _ or II_to select On.
Note: If you select Enable REGZA-LINK Off,
the other items will be grayed out.
4 Press or to highlight the REGZA-LINKSetup
item you want to use, and press _ or _" to select
Onor desired mode.
• TV Auto Input Switch: On/Off
• TV Auto Power: On/Off
• Device Auto Standby: On/Off
• Speaker Preference: TV Speakers/Audio
Receiver
49