Toshiba 55UX600U Flat Panel Television User Manual


 
39
Chapter 6: Basic features
Tuning channels using the
Channel Browser
The Channel Browser
provides an easy navigation
interface for all your channels and inputs. This feature
allows you to:
•Navigate the contents of all of your inputs.
•Keep a list of your favorite channels.
•Keep a history of the last 32 channels or inputs
viewed.
•Quickly surf and tune your recently viewed channels/
inputs from the Channel Browser
History List.
•Surf via Browse mode (to immediately tune channels
as you highlight them in the Channel Browser
) or
Select mode (to surf over channels in the
Channel Browser
before you select one to tune).
•Quickly change inputs from the Inputs List.
•Quickly select REGZA-LINK
®
devices from the
REGZA-LINK List.
To set up the Channel Browser
:
1 From the PREFERENCES menu, highlight
Channel Browser Setup and press .
2 Press b or B to highlight Navigation, and then
press C or c to select either Select Mode or
Browser Mode.
3 Press b or B to highlight History List, and then
press C or c to select the setting you prefer: On or
Off.
Note: History List will be cleared every time the TV is
powered off.
4 Press b or B to highlight ANT/CABLE List, and
then press C or c to select On or Off.
5 Press b or B to highlight Inputs List, and then press
C or c to select On or Off.
6 Press b or B to highlight Favorites List, and then
press C or c to select On or Off.
7 Press b or B to highlight REGZA-LINK List, and
then press C or c to select On or Off.
Note: REGZA-LINK List will be automatically grayed
out and set to off when Enable REGZA-LINK is set to
Off (- Page 48).
8 To return to factory defaults, highlight Reset and
press .
To open the Channel Browser
:
•Press 3 C or # c.
•Press 3 C or # c to surf backward or forward through
the tuned 32 channels in the History list, the channels
in the ANT/CABLE channel list, the inputs in the
Inputs list, the REGZA-LINK
®
devices in the REGZA-
LINK list, or the favorite channels/inputs in the
Favorites list.
•From the APPLICATIONS menu, highlight Channel
Browser and press .
OK
OK
OK