Filter
Top Products
49
Chapter 6: Basic features
Using the HDMI
®
settings feature
This menu consists of the following items (new HDMI
capabilities) and will be grayed out on non-HDMI
inputs.
Some HDMI legacy sources may not work properly
with your HDMI TV, please try setting the following
options (Content Type and INSTAPORT
™
) to Off.
Adjusting these settings should allow your HDMI
legacy source to operate properly with your TV.
The HDMI settings (Content Type and RGB Range)
need proper HDMI source devices. If your HDMI
source device does not support these features, the TV
may not work properly when these features are
enabled.
Note: If your HDMI connection is capable of 1080p and/or
your TV is capable of refresh rates greater than 60 Hz, you
will need a High Speed HDMI
®
cable. Conventional HDMI/
DVI cables may not work properly with this mode.
1 Select the appropriate HDMI input mode (HDMI 1,
HDMI 2, HDMI 3, or HDMI 4).
2 From the PREFERENCES menu, highlight AV
Connection and press .
3 Press B or b to select HDMI Settings.
4 Press B or b to highlight the item you want to set.
5 Press C or c to select your desired setting.
Setting the HDMI
®
audio mode
To set the HDMI audio mode:
1 From the PREFERENCES menu, highlight AV
Connection and press .
2 Press B or b to select HDMI 2 Audio.
3 Press C or c to select Auto, Digital or Analog, and
press .
Note: If PC/HDMI 2 Audio is set to PC, this feature will be
grayed out.
Viewing the HDMI
®
signal
information
1 From the PREFERENCES menu, highlight HDMI
Information Display.
2 Press C or c to select On, and then press . Normal
banner and signal information banner will appear.
Note:
• Signal information banner will appear when this feature
is set to On and you watch HDMI input.
• If you press when this feature is set to Off, only
normal banner will appear.
• When Content type is No Data, this is not displayed.
Mode (default setting) Description
Enable Content
Type: On
This feature adjusts the picture
quality automatically by the
content of “Contents type”
included in the HDMI input.
Note: When Picture Mode is set to
AutoView, this feature is available.
INSTAPORT
™
: On
This feature reduces the lag time
when switching HDMI sources.
RGB Range: Auto
This feature adjusts RGB full range
signal automatically.
When Limited is selected, RGB
output signal is output in the range
from 16 to 235. When Full is
selected, RGB output signal is
output in the range from 0 to 255.
OK
Mode Description
Auto
When viewing the HDMI 2 input, if
digital audio from the HDMI input is
available, it will be output. If not, the TV
will automatically detect and output
analog audio from the PC/HDMI 2
Audio input.
Digital
When viewing the HDMI 2 input, digital
audio from the HDMI input will be
output.
Analog
When viewing the HDMI 2 input,
analog audio from the PC/HDMI 2
Audio input will be output.
OK
EXIT
NFO
NFO