Filter
Top Products
51
Chapter 6: Basic features
Setting the On Timer
You can set the on timer to automatically turn on the TV
to a preset channel or input at a preset time.
To activate the On Timer:
1 From the APPLICATIONS menu, highlight On
Timer and press .
2 Press B or b to select Enable On Timer, and then
press C or c to select On.
Note: If the Enable On Timer is set to Off, other menus
under On Timer cannot be changed.
To set the On Timer:
1 From the APPLICATIONS menu, highlight On
Timer and press .
2 Press B or b to highlight the item you want to
change, and then press C, c or the number buttons
to make your desired adjustment.
3 Highlight Done, and then press .
Note:
• When the On Timer is set to On, the On Timer LED is
turned on (- “LED indications” on page 85).
• If you do not operate the TV for 1 hour after it is powered
on by the On Timer feature, the TV will automatically turn
itself off.
To cancel the On Timer:
1 From the APPLICATIONS menu, highlight On
Timer and press .
2 Press B or b to select Enable On Timer.
3 Press C or c to select Off.
Setting the Sleep Timer
You can set the sleep timer to turn off the TV after a set
length of time (maximum of 12 hours).
To set the sleep timer using the remote control:
Press [ to set the length of time until the TV turns off.
Repeatedly press [ to increase the time in 10-minute
increments, or press B or b to increase or decrease the
time in 10-minute increments, to a maximum of 12
hours.
To set the sleep timer using the on-screen menus:
1 From the APPLICATIONS menu, highlight Sleep
Timer.
2 Press the number buttons to enter the length of time
or press C, c or the number buttons to increase or
decrease in 10-minute increments (maximum of 12
hours).
Note: When a power failure occurs, the sleep timer setting
may be cleared.
To display the remaining sleep time:
Press [.
To cancel the sleep timer:
Press [ repeatedly or press B or b until it is set to 0
minutes.
Item Description
Input
To select video input source (ANT/CABLE,
Video, ColorStream HD, HDMI 1, HDMI 2,
HDMI 3, HDMI 4, or PC).
Channel To select the channel when the TV turns on.
Volume To set the volume when the TV turns on.
Time until
Power On
To set the time when the TV turns on from
now with C or c or the number buttons.
• The setting at time is a unit of ten minutes.
(minimum: 00:10, maximum: 12:00)
OK
OK
OK
OK